Start AT91Bootstrap... ←ブートストラップ起動メッセージ Uncompressing Linux............................................................. .................................... done, booting the kernel. Linux version 2.6.27 (hal@ubuntu-server810) (gcc version 4.2.0 20070413 (prerele ase) (CodeSourcery Sourcery G++ Lite 2007q1-10)) #60 Thu Jul 23 14:09:38 JST 200 9 CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177 Machine: Atmel AT91SAM9260-EK Memory policy: ECC disabled, Data cache writeback Clocks: CPU 198 MHz, master 99 MHz, main 18.432 MHz CPU0: D VIVT write-back cache CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets CPU0: D cache: 8192 bytes, associativity 4, 32 byte lines, 64 sets Built 1 zonelists in Zone order, mobility grouping on. Total pages: 16256 Kernel command line: mem=64M console=ttyS0,115200 mtdparts=physmap-flash.0:2m(ke rnel),5m(user) root=/dev/mtdblock1 ro init=/bin/msh AT91: 96 gpio irqs in 3 banks PID hash table entries: 256 (order: 8, 1024 bytes) Console: colour dummy device 80x30 console [ttyS0] enabled Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) Memory: 64MB = 64MB total Memory: 61748KB available (2768K code, 220K data, 120K init) Calibrating delay loop... 99.12 BogoMIPS (lpj=495616) Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok net_namespace: 288 bytes NET: Registered protocol family 16 AT91: Power Management AT91: Starting after general reset SCSI subsystem initialized usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb NET: Registered protocol family 2 IP route cache hash table entries: 1024 (order: 0, 4096 bytes) TCP established hash table entries: 2048 (order: 2, 16384 bytes) TCP bind hash table entries: 2048 (order: 1, 8192 bytes) TCP: Hash tables configured (established 2048 bind 2048) TCP reno registered NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) JFFS2 version 2.2. (NAND) (SUMMARY) ツゥ 2001-2006 Red Hat, Inc. msgmni has been set to 120 io scheduler noop registered io scheduler anticipatory registered (default) atmel_usart.0: ttyS0 at MMIO 0xfefff200 (irq = 1) is a ATMEL_SERIAL atmel_usart.1: ttyS1 at MMIO 0xfffb0000 (irq = 6) is a ATMEL_SERIAL atmel_usart.2: ttyS2 at MMIO 0xfffb4000 (irq = 7) is a ATMEL_SERIAL brd: module loaded loop: module loaded ssc ssc.0: Atmel SSC device at 0xc4870000 (irq 14) MACB_mii_bus: probed eth0: Atmel MACB at 0xfffc4000 irq 21 (12:34:56:78:9a:bc) eth0: attached PHY driver [Generic PHY] (mii_bus:phy_addr=ffffffff:00, irq=-1) Driver 'sd' needs updating - please use bus_type methods physmap platform flash device: 00800000 at 10000000 physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank Amd/Fujitsu Extended Query Table at 0x0040 number of CFI chips: 1 cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness. 2 cmdlinepart partitions found on MTD device physmap-flash.0 Creating 2 MTD partitions on "physmap-flash.0": 0x00000000-0x00200000 : "kernel" 0x00200000-0x00700000 : "user" atmel_spi atmel_spi.1: Atmel SPI Controller at 0xfffcc000 (irq 13) usbmon: debugfs is not available at91_ohci at91_ohci: AT91 OHCI at91_ohci at91_ohci: new USB bus registered, assigned bus number 1 at91_ohci at91_ohci: irq 20, io mem 0x00500000 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. udc: at91_udc version 3 May 2006 mice: PS/2 mouse device common for all mice rtc-at91sam9 at91_rtt.0: rtc core: registered at91_rtt as rtc0 rtc-at91sam9 at91_rtt.0: rtc0: SET TIME! usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver Advanced Linux Sound Architecture Driver Version 1.0.17. at73c213 spi1.0: at73c213: supported bitrate is 48500 (64 divider) ALSA device list: #0: AT91SAM9260-EK external DAC on irq 14 TCP cubic registered NET: Registered protocol family 17 RPC: Registered udp transport module. RPC: Registered tcp transport module. rtc-at91sam9 at91_rtt.0: hctosys: unable to read the hardware clock VFS: Mounted root (ext2 filesystem) readonly. Freeing init memory: 120K # ls -l ←ログインメッセージは表示されずにすぐにプロンプトが表示される drwxr-xr-x 2 1001 1001 2048 May 5 2009 bin drwxr-xr-x 2 1001 1001 1024 Sep 25 2009 dev drwxr-xr-x 4 1001 1001 1024 Aug 18 2009 etc drwxr-xr-x 2 1001 1001 1024 May 6 2009 lib lrwxrwxrwx 1 1001 1001 11 May 5 2009 linuxrc -> bin/busybox drwx------ 2 root 0 12288 May 5 2009 lost+found drwxr-xr-x 2 1001 1001 1024 Jul 23 2009 proc drwxr-xr-x 2 1001 1001 1024 Aug 4 2009 root drwxr-xr-x 2 1001 1001 1024 Jul 22 2009 sbin drwxr-xr-x 4 1001 1001 1024 May 5 2009 usr drwxr-xr-x 4 1001 1001 1024 Aug 4 2009 var #